AudioControl DQT Specifications download pdf (Page 16)

Owner’s Enjoyment Manual

AudioControl

The Inside

Ground Isolation Selector - Allows the

installer to change the power supply ground

isolation for different systems. This is shipped in

the fully isolated position from the factory. The

other selections can help if you have a ground

noise in the system that doesn’t seem to want to

go away.

Balanced Input Selector – This jumper

changes the input circuitry from balanced mode

to unbalanced. As a general rule, the full ground

and noise isolation of the balanced mode works

best, but some source units prefer a hard audio

ground on the RCA cables.

Setting the Display Brightness

In this mode, you have the ability to select

between two levels of brightness for the display on

your DXS. To access this menu, press and hold

both the S

ELECT and UP ARROW buttons. Using

the left and right navigation buttons, toggle back

and forth between “Bright” and “Dim” and stop

on the level of lighting you are most comfortable

with you. Tap the “S

ELECT” button and your last

display brightness setting will be retained as you

move on to the next mode.

Display

Bright Dim

Mode: Display

1 2 ... 11 12 13 14 15 16 17 18 19 20

No comments

AudioControl DQT Specifications Page 16