AudioControl MP-200 User Manual download pdf

> System switcher, audio processor, and control system

> Out-of-the-box switching and audio control

> 4 video/HDTV and 4 RGB/computer inputs

> Built-in input signal sensing | auto-switching capable

> Separate display and touchpanel preview outputs

> NEW! RGB Pass-thru mode for easy integration with DigitalMedia

> QuickMedia and Crestron Home CAT5 AV connectivity

> 8 balanced stereo audio inputs | 2 gated mic inputs

> Separate program, speech, and record outputs

> Graphic and parametric equalization | 40mS audio delay

> Built-in 40 watt amplifier — stereo, 70V, or 100V models

> 2-Series control engine | e-Control 2 Web server

> 10/100 Ethernet | RoomView and SNMP support

> 2 RS-232, 4 IR, 4 digital in, & 4 relay control ports

> Front panel setup and control | Backlit LCD display

> Keypad, touchpanel, and wireless control options

> Internal power supply | 2-space rack-mountable

The MPS-200 is a complete presentation control and signal routing solution for

boardrooms and classrooms. Integrating the control system, multimedia switcher,

audio processor, and amplifier into a single 2-space rackmount package, the

MPS-200 eliminates the need for separate components without forfeiting

performance or flexibility.

System Switcher—Right out of the box, the MPS-200 provides high-performance

switching of 4 video and 4 RGB computer sources to a single projector or flat-

panel display. Composite, S-Video, component and RGBHV signals can be routed

to the appropriate inputs on the display device, with control of the display

provided via Ethernet, RS-232 or IR. Input signal sensing is provided on every

video and RGB input to enable auto-switching functionality and provide device

power status information to the control system. Selectable sync impedance on the

RGB inputs helps accommodate cable runs of varying lengths.

NEW! RGB Pass-thru mode provides a quick path to integration with the ground-

breaking Crestron DigitalMedia™ system. With just a single 15-pin VGA cable

connected to a DM-MD6X1 DigitalMedia switcher, DMC-DVI input card, or any

other DM product with an RGB input, the MPS-200 automatically routes whatever

video signal is selected – whether RGB, component, S-Video, or composite –

allowing seamless conversion to digital for distribution to HDTV displays and

projectors throughout your facility.

Touchpanel Output—A second discrete output is provided on the MPS-200 to

feed a preview signal to the system touchpanel or other monitor. This output is

controlled separately from the main display output, allowing a different source to

be viewed on the touchpanel. The touchpanel connection is facilitated through a

choice of QuickMedia

(QM) or Crestron Home

(CH) CAT5 Balanced Video

outputs, simplifying wiring to a wide range of Crestron touchpanels. The QM

output supports high-resolution RGB and HDTV plus audio, while the CH output is

limited to standard video and HDTV only (dependent upon the capabilities of

the touchpanel).

QuickMedia

—The QM Touchpanel output can also be used to feed signals

straight to the primary display device, providing a very streamlined, low-cost,

long-distance wiring solution. The Crestron exclusive QuickMedia transport

transmits high-resolution RGB, HD video, stereo program and microphone audio

signals up to 450 feet over a single inexpensive CAT5e type cable

[1]

. Just one

CresCAT-QM cable and a QM receiver are all that is required for complete signal

routing and device control, eliminating all the bulky, expensive cabling that would

otherwise be needed.

Professional Audio Features—Eight stereo audio inputs accept balanced or

unbalanced line-level signals from computers and other program audio sources.

To accommodate a wide range of signals, adjustable input compensation is

employed to help maintain consistent volume levels when switching between

sources. In addition to the 8 program inputs, two gated microphone/line inputs

are included with software-switchable 48V phantom power and independent

4-band speech-optimized equalization. Versatile matrix mixing allows the selected

program signal and the microphone signals to be separated or mixed in any

combination to feed local Program, Speech, and Record outputs, each with its

own unique mix.

Three "local" balanced line level outputs are provided on the MPS-200, each with

independent adjustments for volume, bass, treble, and mute. The stereo

PROGRAM and mono SPEECH outputs are normally intended for driving external

amplification, with relay muting on each output to prevent “thumping” on power

up. The RECORD output allows for a separate stereo mix to feed a recording

device or assistive listening system. Ten-band graphic equalization plus 2-band

parametric equalization on each output eliminates the need for expensive outboard

audio processors, and up to 40mS delay adjustment is available on the SPEECH

output for proper loudspeaker alignment.

The QM Touchpanel output is controlled separately from the other audio outputs,

allowing a different program source and microphone mix to be monitored on the

touchpanel, or output to other audio equipment by way of an appropriate QM

receiver or other QuickMedia device.

Built-in Amplifier—A 40-watt amplifier is built into the MPS-200, with three

models available offering the choice of 8-ohm stereo, 70V mono, or 100V mono

outputs. For large rooms requiring more power, the MPS-200 supports plug-and-

play compatibility with Crestron QM-Series 3-channel amplifiers, providing a

complete solution for driving a professional loudspeaker system with separate

program and speech channels.

Front Panel Control—Out of the box, the MPS-200 front panel supports easy

pushbutton routing of input sources to each of the outputs, and audio volume

adjustment using the volume control knob. Dedicated buttons and indicators are

also provided for separate control of system power and projector power. In

addition, five preset buttons are included for custom functions such as lowering a

projection screen, closing blinds, or selecting a lighting preset.

The front panel label strips are easily customized using Crestron Engraver

software or standard 3/8” tape labels, allowing for the clear designation of each

input, output, and preset button. When selected, these functions will also appear

on the LCD display as generic names (Input 1, 2…), or as custom names (DVD,

Podium PC, Screen Up, etc.).

www.crestron.com

800.237.2041

Crestron MPS-200

Multimedia Presentation

System 200

1 2 3 4

Summary of Contents

Page 1 - Crestron MPS-200

> System switcher, audio processor, and control system> Out-of-the-box switching and audio control> 4 video/HDTV and 4 RGB/computer inputs>

Page 2 - SPECIFICATIONS

Crestron MPS-200 Multimedia Presentation System 200Crestron Electronics, Inc.15 Volvo DrivelRockleigh, NJ 07647Tel: 800.237.2041 / 201.767.3400lFax: 2

Page 3

PROG OUT: (1) 5-pin 3.5mm detachable terminal blockBalanced/unbalanced stereo line-level outputOutput Impedance: 200 ohms balanced, 100 ohms unbalance

Page 4 - (319 mm)

Crestron Electronics, Inc.15 Volvo DrivelRockleigh, NJ 07647Tel: 800.237.2041 / 201.767.3400lFax: 201.767.1903www.crestron.comSpecifications subject t

AudioControl MP-200 User Manual

Browse online or download User Manual for Audio amplifiers AudioControl MP-200. Spec Sheet: Crestron MPS-200 - Multimedia Presentation System 200

Summary of Contents

More documents for Audio amplifiers AudioControl MP-200

Comments to this Manuals

AudioControl MP-200 User Manual

Browse online or download User Manual for Audio amplifiers AudioControl MP-200. Spec Sheet: Crestron MPS-200 - Multimedia Presentation System 200

Summary of Contents

More documents for Audio amplifiers AudioControl MP-200

Comments to this Manuals

Related products and manuals for Audio amplifiers AudioControl MP-200